Why US Shift?
We recommend upgrading for free to Firefox or Chrome.
Are you installing for the first time or upgrading an existing installation?Use the buttons below to make your choice, then click Next to continue.
Includes controller, wiring harness, software, and data cable.
Comes with controller and wire leads for new features
Which solenoid (bulkhead) connector does your transmission have? Examine the connector on your transmission to make sure you're choosing correctly. Only identify the connector according to the number of pins, not by color, since aftermarket connector colors may vary. Click on the pictures below to see a larger view.Use the buttons below to make your choice, then click Next to continue.
The bottom 2 pins are used.Color is usually white, but can vary.
The bottom 2 pins are not used.Color is usually black, but can vary.
Which range (PRNDL) sensor does your transmission have? Examine the sensor and its connector to make sure that you're choosing correctly. If the range sensor is missing from your transmission, we recommend using the digital sensor, as it is more reliable and less expensive. Click on the pictures below to see a larger view.Use the buttons below to make your choice, then click Next to continue.
Which speed sensor connector does your transmission have? Examine the connector and the transmission plug to make sure you're choosing correctly. Click on the pictures below to see a larger view.Use the buttons below to make your choice, then click Next to continue.
Do you have a carburetor? Use the buttons below to make your choice, then click Next to continue.
Upgrade a Quick 1 / Opti to Quick 4 by sending in your current controller. You will be able to use the wiring harness already installed in your vehicle. Additional snap-in leads will be provided to allow you to take advantage of all the new features of the Quick 4. Return shipping via UPS Ground for your upgraded controller is included in this price.
Upgrade a Quick 1 / Opti to Quick 4. To eliminate downtime, we will ship a Quick 4 controller immediately via UPS Ground and will include a pre-paid UPS return label to facilitate the easy return of your Quick 1 / Opti after installation. You will be able to use the wiring harness already installed in your vehicle. Additional snap-in leads will be provided to allow you to take advantage of all the new features of the Quick 4. Shipping both ways via UPS Ground is included in this price.
All AOD-E transmissions and pre-1996 4R70W transmissions use a low-impedance torque converter clutch (TCC) solenoid that isn't compatible with our controllers. The correct solenoid should have a resistance of more than 7 Ohms. If you are not sure whether you need the updated solenoid, feel free to call our technical support line at (864) 646-8920 for assistance. If you need the correct TCC solenoid, it can be purchased locally. A typical application of the correct solenoid is for a 1996-1997 Mustang with a 4R70W transmission. Alternately, you can add the correct solenoid to your order below.
Do you need an updated TCC Solenoid?
Despite looking the same, there are two versions of the later speed sensor. The first was used in 2001 - 2003 transmissions and has a 1 inch long barrel. The 2004 and up speed sensor has a barrel that is 5/64 of an inch shorter for a total of 15/16 inches long. The two sensors are not interchangeable. To make sure you are choosing correctly, measure the barrel of your sensor to see which one you have.
You will need a throttle position sensor to use the Quick 4. Choose the TPS kit below that is compatible with your carburetor. These TPS kits come with all necessary hardware for installation, such as TPS, Brackets, Bolts, and Fittings.Use the buttons below to make your choice, then click Next to continue.
Throttle Position Sensor Kit for Holley Carburetors with no choke. While this kit is designed for Holley carburetors with no choke, it can be adapted to other carburetors and injector pumps.
Throttle Position Sensor Kit for Holley 4160/4150-Style Carburetors with Electric Choke. This TPS kit is an official Holley product designed by Holley for their own carburetors. High quality design with OEM appearance.
Throttle Position Sensor Kit for Edelbrock Carburetors. This TPS kit is designed and manufactured by US Shift. High quality design that appears to be part of the carburetor. Discount applies when purchased with US Shift controller.
Throttle Position Sensor Kit for Street Demon Carburetors.
Now that we know which components your system will need, click the Finish button to review them for accuracy and begin the checkout process.
If you experience any difficulty during the ordering process, please contact our support team for assistance.
Copyright © 1997-2017, Baumann Electronic Controls, LLC