US Shift Edelbrock TPS Kit
The US Shift Throttle Position Sensor Kit (TPS KIT 3) allows you to use a transmission control system (such as the Quick 4 or Quick 1) on a vehicle with an Edelbrock carburetor.
The kit comes with everything you need to get an Edelbrock carburetor connected to a device that requires a throttle position reading. Installation is quick and easy. For instructions, read the manual or watch the installation video below.
Advantages of the US Shift TPS Kit
- Non-contact electronic Hall-Effect sensor designed specifically for under-hood throttle position sensing applications. Provides consistent performance over the life of the vehicle and won’t wear out or become intermittent like other throttle position sensors.
- Attractive and durable heavy-gauge bracket and sensor lever constructed of 304 stainless steel alloy enables consistent and stable sensor operation and won’t rust.
- Aesthetically-conscious design provides an integrated look and appears to be part of the carburetor.
- Extremely fast and simple installation with no need for alignment or adjustments.
- Air horn-mounted design allows removal and re-installation of carburetor without disturbing TPS voltage settings.
- Stainless steel hardware, including self-locking sensor mounting screws and actuator cable assembly, provides trouble-free performance and lasting beauty.
- Cable-pull design allows mechanical compliance for silky-smooth operation and eliminates sticking and binding.
- High Temperature PTFE sensor lead wiring with thin, attractive, fiberglass braid covering and high-temperature, cross-linked polyethylene (XLPE) insulated wiring connection harness with sealed connector is unaffected by under-hood temperatures and moisture.
- Generous 7ft wire length eliminates the need for unsightly under-hood splices.
- Compatible with any transmission controller or data-logger.
- Backed by a 3 Year Warranty.
Part #: TPSKIT3
(Discounted when purchased with a US Shift controller)
California Residents Only - WARNING: Prop65 Info
Visit Our Online Store where you can purchase TPS kits individually or with a US Shift controller
US Shift TPS Adapter for Aftermarket EFI Systems
This adapter can be used to tap into a speed signal from a Holley Sniper, Edelbrock Pro-Flow 4, or FiTech Throttle Body EFI System. This adapter is only compatible with the US Shift Quick controller lineup. (Quick6, Quick4, Quick2, and Quick1 [including Opti] controllers.) This adapter has an integrated filter circuit that protects the TPS signal integrity to ensure compatibility.
Part #: TPSAdapter1
RTD Throttle Position Sensor Kit
Can be used on all standard flange Holley style 4 barrel carburetors. Comes with all necessary hardware for installation. (TPS, Brackets, Bolts, and Fittings.) Compatible with all US Shift transmission controllers.
Click here to go to the online store.
Part #: TPSKIT1
Holley Throttle Position Sensor Kit
Can be used on Holley carburetors with electric choke. Comes with all necessary hardware for installation. (TPS, Brackets, Bolts, and Fittings.) Compatible with all US Shift transmission controllers.
Part #: TPSKIT2
Street Demon Throttle Position Sensor Kit
Can be used on Street Demon carburetors. Comes with all necessary hardware for installation. (TPS, Brackets, Bolts, and Fittings.) Compatible with all US Shift transmission controllers. This TPS kit is designed for Street Demon carburetors only and will not fit other Demon models.